|
Fast modelling of roll stack behaviour for control applications |
J. M. Allwood, G. F. Bryant |
1997 |
|
|
The analysis and design of spatial control systems in strip metal rolling |
S. R. Duncan, J. M. Allwood, S. S. Garimella |
1998 |
|
|
A fast model of thermal camber evolution in metal rolling for on-line use |
S. Jarrett, J. M. Allwood |
1999 |
|
|
Dynamic modelling of cross-directional actuators: Implications for control |
S. R. Duncan, J. M. Allwood, W. P. Heath, K. W. Corscadden |
2000 |
|
|
Model based evaluation of the effect of horizontal roll offset on cross-directional control performance in cold strip rolling |
J. M. Allwood |
2002 |
|
|
The structured development of a simulation based learning tool for the Taguchi Method |
J. M. Allwood, B. M. Cox, S. S. Latif |
2002 |
|
|
Lean manufacturing in temperature dependent processes with interruptions |
W. L. Lee, J. M. Allwood |
2003 |
|
|
The impact of job rotation on problem solving skills |
J. M. Allwood, W. L. lee |
2004 |
|
|
The Technical and Commercial Potential of an Incremental Ring Rolling Process |
J.M. Allwood, R. Kopp, D. Michels, O. Music, M. Öztop, T.F. Stanistreet, A.E. Tekkaya, I. Tiedemman |
2005 |
Flexible Ring Rolling |
|
A structured search for applications of the incremental sheet-forming process by product segmentation |
J. M. Allwood, A. N. Bramley, T. W. Ridgman, A. R. Mileham |
2005 |
|
|
The development of ring rolling technology |
J. M. Allwood, A. E. Tekkaya, T. F. Stanistreet |
2005 |
Flexible Ring Rolling |
|
The design of an agent for modelling supply chain network dynamics |
J. M. Allwood, J-H. Lee |
2005 |
|
|
An incremental solution method for rough contact problems |
J. A. Allwood |
2005 |
|
|
Survey and Performance Assessment of Solution Methods for Elastic Rough Contact Problems |
J. M. Allwood |
2005 |
|
|
Asymmetric Single Point Incremental Forming of Sheet Metal |
J. Jeswiet, F. Micari, G. Hirt, A. Bramley, J. Duflou, J. M. Allwood |
2005 |
|
|
The development of ring rolling technology : Part 2 Investigation of process behaviour and production equipment |
J. M. Allwood, A. E. Tekkaya, T. F. Stanistreet |
2005 |
Flexible Ring Rolling |
|
A Novel Method for the Rapid Production of Inexpensive Dies and Moulds with Surfaces Made by Incremental Sheet Forming |
J. M. Allwood, A. N. Bramley, T. W. Ridgman, A. R. Mileham |
2005 |
|
|
A survey of flexible forming processes in Japan |
J. M. Allwood, H. Utsunomiya |
2006 |
Flexible metal spinning, Flexible dieless forming - other |
|
Desktop paper recycling: A survey of novel technologies that might recycle office paper within the office |
T. A. M. Counsell, J. M. Allwood |
2006 |
Whole Systems Analysis |
|
Paddle Forming: a Novel Class of Sheet Metal Forming Processes |
J.M. Allwood, D.R. Shouler |
2007 |
|
|
Incremental Bulk Forming |
P. Groche, D. Fritsche, E.A. Tekkaya, J.M. Allwood, G. Hirt, R. Neugebauer |
2007 |
|
|
Reducing climate change gas emissions by cutting out stages in the life cycle of office paper |
T. A. M. Counsell, J. M. Allwood |
2007 |
Other inventions |
|
A structured search for novel manufacturing processes leading to a periodic table of ring rolling machines |
J. M. Allwood |
2007 |
Flexible Ring Rolling |
|
Environmental evaluation of localising production as a strategy for sustainable development: a case study of two consumer goods in Jamaica |
S. N. Russell, J. M. Allwood |
2008 |
|
|
An approach to scenario analysis of the sustainability of an industrial sector applied to clothing and textiles in the UK |
J.M. Allwood, S.E. Laursen, S.N. Russell, C. Malvido de Rodríguez, N.M.P. Bocken |
2008 |
Whole Systems Analysis |
|
Using abrasives to remove toner-print so that office paper might be reused |
T. A. M. Counsell, J. M. Allwood |
2008 |
|
|
Incremental forming of sandwich panels |
K.P. Jacksona, J.M. Allwood, M. Landert |
2009 |
Flexible dieless forming - other |
|
The role of washing machines in LCA studies |
J. M. Cullen, J. M. Allwood |
2009 |
Steel Efficiency Analysis, Whole Systems Analysis |
|
The mechanics of incremental sheet forming |
K. Jackson, J. Allwood |
2009 |
|
|
Closed-loop feedback control of product properties in flexible metal forming processes with mobile tools |
J. M. Allwood, O. Music, A. Raithathna, S. R. Duncan |
2009 |
Flexible metal spinning, Flexible dieless forming - other |
|
Generalised forming limit diagrams showing increased forming limits with non-planar stress states |
J. M. Allwood, D. R. Shouler |
2009 |
|
|
Using solvents to remove a toner-print so that office paper might be reused |
J. M. Allwood |
2009 |
Whole Systems Analysis |
|
The efficient use of energy: tracing the global flow of energy from fuel to service |
J. M. Cullen, J. M. Allwood |
2010 |
Whole Systems Analysis |
|
The effect of partially cut-out blanks on geometric accuracy in incremental sheet forming |
J. M. Allwood, D. Braun, O. Music |
2010 |
|
|
Options for achieving a 50% cut in industrial carbon emissions by 2050 |
J. M. Allwood, J. M. Cullen, R. L. Milford |
2010 |
Policy |
|
Design and Use of a Novel Sample Design for Formability Testing in Pure Shear |
D.R. Shouler, J. M. Allwood |
2010 |
|
|
Theoretical efficiency limits in energy conversion devices |
J. M. Cullen, J. M. Allwood |
2010 |
|
|
A Review of the Mechanics of Metal Spinning |
O. Music, J. M. Allwood, K. Kawai |
2010 |
Flexible metal spinning |
|
Assessing the CO2 impact of current and future rail track in the UK |
R. L. Milford, J. M. Allwood |
2010 |
Vehicles |
|
Development of an eco-ideation tool to identify stepwise greenhouse gas emissions reduction options for consumer goods |
N.M.P. Bocken, J.M. Allwood, A.R. Willey, J.M.H. King |
2011 |
Bioenergy and Water |
|
Reducing energy demand: what are the practical limits? |
J. M. Cullen, J. M. Allwood, E. H. Borgstein |
2011 |
Policy |
|
Flexible asymmetric spinning |
O. Music, J. M. Allwood |
2011 |
|
|
Material Efficiency: a White Paper |
J. M. Allwood, M. F. Ashby, T. G. Gutowski, Ernst Worrell |
2011 |
Steel Efficiency Analysis, Whole Systems Analysis, Policy |
|
Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors |
R. L. Milford, J. M. Allwood, J. M. Cullen |
2011 |
Steel Efficiency Analysis, Whole Systems Analysis |
|
The use of spatial impulse responses to characterise flexible forming processes with mobile tools |
O. Music, J. M. Allwood |
2011 |
Flexible metal spinning, Flexible dieless forming - other |
|
The potential for reducing metal demand through lightweight product design |
M. A. Carruth, J. M. Allwood, M. C. Moynihan |
2011 |
Construction, Vehicles, Steel Efficiency Analysis |
|
Paper un-printing: using lasers to remove toner-print in order to reuse office paper |
D. Leal, J. M. Allwood, T. A. M. Counsell |
2011 |
Whole Systems Analysis, Other inventions |
|
What Do We Know About Metal Recycling Rates? |
T. E. Graedel, J. M. Allwood, J-P. Birat, M. Buchert, C. Hagelüken, B. K. Reck, S. F. Sibley, G. Sonnemann |
2011 |
Steel Efficiency Analysis, Policy |
|
Mapping the global flow of steel: from steelmaking to end-use goods |
J. M. Cullen, J. M. Allwood, M. D. Bambach |
2012 |
Steel Efficiency Analysis |
|
The use of spatial impulse responses to characterise flexible forming processes with mobile tools |
O. Music, J. M. Allwood |
2012 |
|
|
The Use Of Energy In China: Tracing The Flow Of Energy From Primary Source To Demand Driver |
L. Ma, J. M. Allwood, J. M. Cullen, Z. Li |
2012 |
|
|
The development of a hot rolling process for variable cross-section I-beams |
M. A. Carruth, J. M. Allwood |
2012 |
Construction |
|
Strategies to reduce the carbon footprint of consumer goods by influencing stakeholders |
N. M. P. Bocken, J. M. Allwood |
2012 |
Whole Systems Analysis, Policy |
|
Bulk forming of sheet metal |
M. Merklein, J. M. Allwood, B. A. Behrens, A. Brosius, H. Hagenah, K. Kuzman, K. Mori, A. E. Tekkaya, A. Weckenmann
|
2012 |
Steel Efficiency Analysis |
|
Toner-print removal from paper by long and ultrashort pulsed lasers |
D. R. Leal, J. M. Allwood, M. Schmidt, I. Alexeev |
2012 |
|
|
Reusing Steel and Aluminium Components at End of Product Life |
D. R. Cooper, J. M. Allwood |
2012 |
Steel Efficiency Analysis, Whole Systems Analysis |
|
The flow of steel into the construction sector |
M. C. Moynihan, J. M. Allwood |
2012 |
Construction |
|
Development of a tool for rapidly assessing the implementation difficulty and emissions benefits of innovations |
N.M.P. Bocken, J.M. Allwood, A.R. Willey, J.M.H. King |
2012 |
Policy |
|
Visualising a stochastic model of California water resources using Sankey diagrams |
E. Curmi , R. Fenner, K. Richards, J. M. Allwood, B. Bajželj, G. M. Kopec |
2013 |
|
|
A novel process for transforming sheet metal blanks: ridged die forming |
M. A. Carruth, J. M. Allwood |
2013 |
|
|
Mapping the global flow of aluminium: from liquid aluminium to end-use goods |
J. M. Cullen, J. M. Allwood |
2013 |
Whole Systems Analysis, Component-making - Other |
|
The steel scrap age |
S. Pauliuk, R. L. Milford, D. B. Müller, J. M. Allwood |
2013 |
Steel Efficiency Analysis |
|
The incentives for material efficiency along the steel sector supply chain: an analysis using input output techniques |
A. C. H. Skelton, J. M. Allwood |
2013 |
Steel Efficiency Analysis |
|
The Roles of Energy and Material Efficiency in Meeting Steel Industry CO2 Targets |
R. L. Milford, S. Pauliuk, J. M. Allwood, D. B. Müller |
2013 |
Steel Efficiency Analysis, Policy |
|
Material Efficiency: providing material services with less material production |
J. M. Allwood, M. F. Ashby, T. G. Gutowski, E. Worrell |
2013 |
Vehicles |
|
The Energy Required to Produce Materials: Constraints on Energy Intensity Improvements, Parameters of Demand |
T. G. Gutowski, S. Sahni, J. M. Allwood, M. F. Ashby, E. Worrell |
2013 |
Whole Systems Analysis, Policy |
|
A Global Assessment of Manufacturing: Economic Development, Energy Use, Carbon Emissions, and the Potential for Energy Efficiency and Materials Recycling |
T. G. Gutowski, J. M. Allwood, C. Herrmann, S. Sahni |
2013 |
Whole Systems Analysis |
|
Transitions to material efficiency in the UK steel economy |
J. M. Allwood |
2013 |
Steel Efficiency Analysis |
|
An integrated representation of the services provided by global water resources |
E. Curmi, K. Richards, R. Fenner, J. M. Allwood, G. M. Kopec, B. Bajželj |
2013 |
Bioenergy and Water |
|
Product Life Trade-Offs: What If Products Fail Early? |
A. C. H. Skelton, J. M. Allwood |
2013 |
Construction, Vehicles, Steel Efficiency Analysis, Whole Systems Analysis |
|
Designing climate change mitigation plans that add up |
B. Bajželj, J. M. Allwood, J. M. Cullen |
2013 |
Whole Systems Analysis, Policy |
|
Importance of food-demand management for climate mitigation |
B. Bajželj, K. S. Richards, J. M. Allwood, P. Smith, J. S. Dennis, E. Curmi, C. A. Gilligan |
2014 |
|
|
Viability and performance of demountable composite connectors |
M. C. Moynihan, J. M. Allwood |
2014 |
Construction |
|
Closed-loop control of product properties in metal forming: a review and prospectus |
J. A. Polyblank, J. M. Allwooda, S. R. Duncan |
2014 |
|
|
Utilization of structural steel in buildings |
M. C. Moynihan, J. M. Allwood |
2014 |
Construction |
|
The influence of deformation conditions in solid-state aluminium welding processes on the resulting weld strength |
D. R. Cooper, J. M. Allwood |
2014 |
Whole Systems Analysis |
|
Real-time measurement of ring-rolling geometry using low-cost hardware |
M. R. Arthington, C. J. Cleaver, J. M. Allwood, S. R. Duncan |
2014 |
Flexible Ring Rolling |
|
Component level strategies for exploiting the lifespan of steel in products |
D. R. Cooper, A. C.H. Skelton, M. C. Moynihan, J. M. Allwood, |
2014 |
Vehicles |
|
Land Use Implications Of Future Energy System Trajectories—The Case Of The UK 2050 Carbon Plan |
D. Konadu, Z. S. Mourão, J. M. Allwood, K. S. Richards, G. Kopec, R. McMahon, R. Fenner |
2015 |
|
|
Measurement and control of variable geometry during ring rolling |
M. R. Arthington, C. J. Cleaver, J. M. Allwood, S. R. Duncan |
2015 |
Flexible Ring Rolling |
|
Parametric Toolpath Design in Metal Spinning |
J. A. Polyblank, J. M. Allwood |
2015 |
Flexible metal spinning |
|
Achievable geometries in flexible radial profile ring rolling |
C. J. Cleaver, J. M. Allwood
|
2015 |
Flexible Ring Rolling |
|
Not all low-carbon energy pathways are environmentally “no-regrets” options |
D. Konadu, Z. S. Mourão, J. M. Allwood, K.S. Richards, G. M. Kopec, R. A. McMahon, R. A. Fenner |
2015 |
|
|
Mapping the global flow of tungsten to identify key material efficiency and supply security opportunities |
D. Leal, J. M. Allwood, E. Petavratzi, T. J. Brown, G. Gunn |
2015 |
|
|
A General Nonlinear Least Squares Data Reconciliation and Estimation Method for Material Flow Analysis |
G.M. Kopec, J. M. Allwood, J. M. Cullen, D. Ralph |
2015 |
|
|
The influence of UK emissions reduction targets on the emissions of the global steel industry |
A. Cabrera Serrenho, Z. Sobral Mourão, J. Norman, J. M. Cullen, J. M. Allwood |
2015 |
|
|
Metal forming beyond shaping: predicting and setting product properties |
A.E. Tekkaya, J.M. Allwood, P.F. Bariani, S. Bruschi, J. Cao, S. Gramlich, P. Groche, G. Hirt, T. Ishikawa, C. Löbbe, J. Lueg-Althoff, M. Merklein, W.Z. Misiolek, M. Pietrzyk, R. Shivpuri, J. Yanagimoto |
2015 |
Whole Systems Analysis, Component-making - Other |
|
China’s Energy-Water Nexus – Assessment Of The Energy’s Sector Compliance With The “3 Red Lines” Industrial Water Policy |
Y. Quin, E. Curmi, G. M. Kopec, J. M. Allwood, K. S. Richards |
2015 |
Bioenergy and Water |
|
Tailor Blank Casting - Control Of Sheet Width Using An Electromagnetic Edge Dam In Aluminium Twin Roll Casting |
M. McBrien, J. M. Allwood, N. S. Barekar |
2015 |
Vehicles, Other inventions |
|
A multi-method approach for analysing the potential employment impacts of material efficiency |
S. Cooper, A. C.H. Skelton, A. Owen, D. Densley-Tingley, J. M. Allwood |
2016 |
Construction, Vehicles |
|
Potential for energy savings by heat recovery in an integrated steel supply chain |
M. McBrien, A. Cabrera Serrenho, J. M. Allwood |
2016 |
Steel Efficiency Analysis |
|
Mortar as a model to predict self-compacting concrete rheological properties as a function of time and temperature |
Gołaszewski J., Kostrzanowska-Siedlarz A., Cygan G., Drewniok M. P. |
2016 |
Construction |
|
Ring rolling with variable wall thickness |
C. J. Cleaver, M. R. Arthington, S. Mortazavi, J. M. Allwood
|
2016 |
Flexible Ring Rolling |
|
Manufacturing at double the speed |
J. M. Allwood, T. H.C. Childs, A. T. Clare, A. K.M. De Silva, V. Dhokia, I. M. Hutchings, R. K. Leach, D. R. Leal-Ayala, S. Lowth, C. E. Majewski, A. Marzano, J. Mehnen, A. Nassehi, E. Ozturk, M. H. Raffles, R Roy, I. Shyha, S. Turner |
2016 |
|
|
Material Stock Demographics: Cars in Great Britain |
A. Cabrera Serrenho, J. M. Allwood |
2016 |
Vehicles |
|
Automatic design of sheet metal forming processes by “un-forming” |
E. G. Loukaides, J. M. Allwood |
2016 |
|
|
Socio-technical factors influencing current trends in material throughput in the UK automotive industry |
Simone Cooper, Brendan J. Doody, Julian M. Allwood |
2017 |
Vehicles |
|
A computational paradigm for the optimisation of steel building structures based on cost and carbon indexes in early design stages |
S. Eleftheriadis, C.F. Dunant, M.P. Drewniok, W. Rogers-Tizard |
2017 |
Construction |
|
Catchment Level Water Resource Constraints on UK Policies for Low-Carbon Energy System Transitions by 2030 |
D Konodu, R. A. Fenner |
2017 |
|
|
Real and perceived barriers to steel reuse across the UK construction value chain |
Cyrille F. Dunant, Michał P. Drewniok, Michael Sansom, Simon Corbey, Julian M. Allwood,
Jonathan M. Cullen |
2017 |
Construction |
|
Influence of the Rheological Properties of SCC on the Formwork Pressure |
Drewniok M.P., Cygan G., Gołaszewski J. |
2017 |
|
|
The impact of reducing car weight on global emissions: the future fleet in Great Britain |
André Cabrera Serrenho
Jonathan Norman
Julian Allwood |
2017 |
Vehicles |
|
Why are Material Efficiency Solutions a Limited Part of the Climate Policy Agenda? An application of the Multiple Streams Framework to UK policy on CO2 emissions from cars |
Simone Cooper-Searle,
Finbarr Livesey,
Julian M. Allwood |
2017 |
Vehicles, Policy |
|
Successful steel reuse in the UK – key aspects why it happened |
Drewniok Michał P. , Dunant Cyrille F. , Allwood Julian M. , Cullen Jonathan M. |
2017 |
|
|
Testing the greenhouse gas emissions reduction potential of alternative strategies for the english housing stock |
André Cabrera Serrenho
Michal Drewniok
Cyrille Dunant
Julian M. Allwood |
2018 |
Construction |
|
Hybrid Sankey diagrams: Visual analysis of multidimensional data for understanding resource use |
R.C.Lupton
J.M.Allwood |
2018 |
|
|
Options to make steel reuse profitable: An analysis of cost and risk distribution across the UK construction value chain |
Cyrille F. Dunant
Michał P. Drewniok
Michael Sansom
Simon Corbey
Jonathan M.Cullen
Julian M.Allwood |
2018 |
Steel Efficiency Analysis |
|
Incremental Material Flow Analysis with Bayesian Inference |
R C Lupton
J M Allwood |
2018 |
|
|
How much cement can we do without? Lessons from cement material flows in the UK |
W. Shanks
C.F. Dunant
Michał P. Drewniok
R.C. Lupton
A. Serrenho
Julian M. Allwood |
2018 |
Whole Systems Analysis |
|
Options to make steel reuse profitable: An analysis of cost and risk distribution across the UK construction value chain |
C. F. Dunant, M. P. Drewniok, M. Sansom, S. Corbey, J. M. Cullen, and J. M. Allwood |
2018 |
Construction |
|
Finding the Most Efficient Way to Remove Residual Copper from Steel Scrap |
Katrin E. Daehn
André Cabrera Serrenho
Julian Allwood |
2018 |
Steel Efficiency Analysis |
|
Toolpath generation for asymmetric mandrel-free spinning |
Iacopo M.Russo
Evripides G.Loukaides |
2018 |
|
|
Energy and material efficiency of steel powder metallurgy |
José M.C .Azevedo
André Cabrera Serrenho
Julian M.Allwood |
2018 |
Steel Efficiency Analysis |
|
How Will Copper Contamination Constrain Future Global Steel Recycling? |
Katrin E. Daehn
André Cabrera Serrenho
Julian M. Allwood |
2018 |
|
|
Preventing wetting between liquid copper and solid steel: a simple extraction technique |
Daehn, Kathrin E.; Gonzalez Cabrera Honorio Serrenho, Andre; Allwood, Julian |
2019 |
|
|
Regularity and optimisation practice in steel structural frames in real design cases |
Cyrille F. Dunant
Michał P. Drewniok
Stathis Eleftheriadis
Jonathan M. Cullen
Julian M. Allwood |
2019 |
Construction, Steel Efficiency Analysis |
|
A marginal abatement cost curve for material efficiency accounting for uncertainty |
Cyrille F. Dunant
Alexandra C.H. Skelton
Michał P. Drewniok
Jonathan M. Cullen
Julian M. Allwood |
2019 |
Vehicles |
|
Curvature Development in Ring Rolling |
Christopher J. Cleaver, Julian M. Allwood |
2019 |
Flexible Ring Rolling |
|
Implementing material efficiency in practice: A case study to improve the material utilisation of automotive sheet metal components |
Philippa Maia Horton
Julian M. Allwood
Christopher Cleaver |
2019 |
Vehicles |
|
Scrap, carbon and cost savings from the adoption of flexible nested blanking |
Flint, I. P.; Allwood, J. M.; Serrenho, A. C. |
2019 |
Vehicles |
|
Material Demand Reduction and Closed-Loop Recycling Automotive Aluminium |
Philippa Horton
Julian Allwood
Paul Cassell
Christopher Edwards |
2019 |
Vehicles |
|
An experimental analysis of the relationship between the corner, die and punch radii in forming isolated flanged shrink corners from Al 5251 |
Horton, P. M.; Allwood, J. M.; Cleaver, C.; Nagy-Sochacki, A. |
2020 |
Incremental sheet forming |
|
Raising by spinning |
Russo, I. M.; Cleaver, C. J.; Loukaides, E. G.; Allwood, J. M. |
2020 |
Flexible metal spinning |
|
Comparing energy and material efficiency rebound effects: an exploration of scenarios in the GEM-E3 macroeconomic model |
Skelton, A. C. H.; Paroussos, L.; Allwood, J. M. |
2020 |
Vehicles, Whole Systems Analysis |
|
The influence of part asymmetry on the achievable forming height in multi-pass spinning |
Russo, Iacopo M.; Cleaver, Christopher J.; Allwood, Julian M.; Loukaides, Evripides G. |
2020 |
Flexible metal spinning |
|
The influence of constraint rolls on temperature evolution and distribution in radial ring rolling |
Lohmar, J.; Cleaver, C. J.; Allwood, J. M. |
2020 |
Flexible Ring Rolling |
|
Material Flow Analysis with Multiple Material Characteristics to Assess the Potential for Flat Steel Prompt Scrap Prevention and Diversion without Remelting |
Flint, Iain P.; Cabrera Serrenho, André; Lupton, Richard C.; Allwood, Julian M. |
2020 |
Steel Efficiency Analysis |
|
The re-direction of small deposit mining: Technological solutions for raw materials supply security in a whole systems context |
Moore, K. R.; Whyte, N.; Roberts, D.; Allwood, J.; Leal-Ayala, D. R.; Bertrand, G.; Bloodworth, A. J. |
2021 |
|
|
Good early stage design decisions can halve embodied CO2 and lower structural frames’ cost |
Cyrille F.Dunant, Michał P.Drewniok, John J.Orr, Julian M.Allwood |
2021 |
Construction |
|
Re-framing the threat of global warming: an empirical causal loop diagram of climate change, food insecurity and societal collapse |
Richards, C. E.; Lupton, R. C.; Allwood, J. M. |
2021 |
|
|
Seven principles of toolpath design in conventional metal spinning |
Russo IM, Cleaver CJ, Allwood JM |
2021 |
Flexible metal spinning |
|
The technological and social timelines of climate mitigation: Lessons from 12 past transitions |
Nelson, S.; Allwood, J. M. |
2021 |
Policy |
|
Technology or behaviour? Balanced disruption in the race to net zero emissions |
Nelson S, Allwood JM |
2021 |
|
|
International risk of food insecurity and mass mortality in a runaway global warming scenario |
C.E. Richards, H.L. Gauch, J.M. Allwood |
2023 |
|
|
Technology to the rescue? Techno-scientific practices in the United Kingdom Net Zero Strategy and their role in locking in high energy decarbonisation pathways |
Stephenson, S
Allwood, J |
2023 |
|
|
What Contribution Could Industrial Symbiosis Make to Mitigating Industrial Greenhouse Gas (GHG) Emissions in Bulk Material Production? |
Lukas Gast, André Cabrera Serrenho, Julian M. Allwood* |
2024 |
Construction, Steel Efficiency Analysis |
|
Electric recycling of Portland cement at scale |
C. F. Dunant,
S. Joseph,
R. Prajapati
J. M. Allwood |
2024 |
Construction, Other inventions |
|
What bulk material production is possible on a transition to net zero emissions by 2050 with limited zero emissions resources? |
Lukas Gast a, Julian M. Allwood a |
2024 |
|
|
How energy demand and wellbeing change as we use our time differently |
S. R. Davies
R. C. Lupton
J.M. Allwood |
2024 |
|
|
Feasible supply of steel and cement within a carbon budget is likely to fall short of expected global demand |
Takuma Watari, André Cabrera Serrenho, Lukas Gast, Jonathan Cullen & Julian Allwood |
2024 |
Construction, Steel Efficiency Analysis |
